Trident brings industrial fiber-laser surface prep and on-site flame spray powder coating straight to your boatyard, marina, shop or job site. No blast media, no chemical strippers, no mess left behind.
A 500-watt pulsed fiber laser removes rust, paint and coatings down to clean metal without eating the base material. Then we seal it with flame spray powder coating on site, before it has a chance to flash rust.
Props, shafts, deck hardware, winches, trailers and engine parts, right in the boatyard. The laser takes off the corrosion and leaves the sound metal alone.
Stripping old paint, powder coat and failed coatings off steel, aluminum and stainless, with no sandblast media and no chemical strippers.
Clean, contamination-free surfaces for welding, NDT inspection and recoating. Precise enough to work right up to the edge of what you want kept.
Powder coating applied in the field, with no oven and zero VOCs. Strip and coat in the same visit, so nothing flash rusts in between.
Not just metal. With an epoxy primer coat, flame spray goes down on concrete, masonry, fiberglass and wood: docks, pilings, walkways, tanks and more.
Machinery, molds, fixtures and parts cleaned and coated in place, so you're not tearing down and shipping parts out.
Sandblasting and chemical stripping leave you with a second mess to deal with. Laser cleaning doesn't.
No grit or solvent to contain, collect or haul away.
We remove the contaminant, not the part.
Clean one area without masking off everything around it.
We come to the boat, the yard or the shop.
Paint is a skin, and once it chips, rust gets underneath. Flame spray powder coating is a tough, thick barrier you can fix in the field.
A tough, flexible coating that takes impacts instead of flaking off like paint.
Damaged spots get patched on site and blend in. No stripping the whole piece and starting over.
Build up layer after layer where wear and abrasion are worst.
Laser-cleaned, etched steel and aluminum make the ideal anchor for the coating.
Goes beyond metal with an epoxy primer coat.
No solvents and no oven. Applied right where the part lives.
Watch the laser strip it and the flame spray seal it.
Before-and-after results from real jobs, plus in-depth videos on specific laser and flame spray operations.
Send a few photos of the part or surface and roughly how big it is, whether it's metal, concrete, fiberglass or wood. We'll come back with a price and tell you honestly whether laser is the right call.
Based in Oxnard · Serving Ventura Harbor, Channel Islands, Port Hueneme and all of Ventura County